Load time:	10/27/2005 02:46:42 PM
Read time:	10/27/2005 02:46:42 PM
Kinetic read cycle:	1  of  1
Read start delay time:	0	s
Time delay between kinetic reads:	<n/a>
Barcode:	ERROR
Method ID:	DNA-Tech
Plate ID:	#203
Comment:	new comment
Microplate format:	MJRBlackSkirt96
Shake time:	0	s
Temperature:	31.1	C
Instrument tag:	
Serial number:	AD2123
Read sequence:	column
Mode sequence:	plate
Detection mode:	f4
Light sensor:	HC-120
Excitation side:	Top
Emission side:	Top
Lamp:	Continuous
Readings per well:	1
Time between readings:	<n/a>
Integration time:	100000	us
Attenuator mode:	m
Motion settling time:	25	ms
Z Height:	7.05	mm	Middle
Excitation filter:	1	Fluorescein 485 nm
Emission filter:	1	Fluorescein 530 nm
Beamsplitter:	Top	Fluorescein 505
Excitation polarizer filter:	o
Emission polarizer filter:	o
Detector counting:	SmartRead
Flash lamp voltage:	<n/a>
Delay after flash:	<n/a>
Sensitivity setting:	2
A/D converter gain:	x1
Integrating gain:	x1
Max cps:	137696960	cps
Min counts:	9196	counts
Well list:	r0(a1:e1,g1:h1,a2:h2,f1) = (f4(a1:e1,g1:h1,a2:h2,f1))
Data:	RAW DATA
Units:	rfu
Display format:	%.9e
	1	2	3	4	5	6	7	8	9	10	11	12
A	1.705145200e+009	2.101812400e+009										
B	1.710690000e+008	1.921471200e+009										
C	3.268710000e+007	2.123524600e+009										
D	1.389460000e+007	1.226864100e+009										
E	1.913480000e+007	1.665824300e+009										
F	9.196500000e+006	1.376969600e+010										
G	3.372096800e+009	1.185467680e+010										
H	1.659384600e+009	1.918844800e+009										
Well list:	r1(a1:e1,g1:h1,a2:h2) = (f4(a1:e1,g1:h1,a2:h2) - avg(f4(f1)))
Data:	BACKGROUND SUBTRACTED DATA
Units:	rfu
Display format:	%.9e
	1	2	3	4	5	6	7	8	9	10	11	12
A	1.695948700e+009	2.092615900e+009										
B	1.618725000e+008	1.912274700e+009										
C	2.349060000e+007	2.114328100e+009										
D	4.698100000e+006	1.217667600e+009										
E	9.938300000e+006	1.656627800e+009										
F		1.376049950e+010										
G	3.362900300e+009	1.184548030e+010										
H	1.650188100e+009	1.909648300e+009