Load time:	12/09/2008 04:57:32 PM
Read time:	12/09/2008 04:57:32 PM
Kinetic read cycle:	1  of  1
Read start delay time:	0	s
Time delay between kinetic reads:	<n/a>
Barcode:	<n/a>
Method ID:	DNATech Fluorescence Int
Plate ID:	#1780
Comment:	new comment
Microplate format:	MJRBlackSkirt96
Shake time:	0	s
Temperature:	31.3	C
Instrument tag:	
Serial number:	AD2123
Read sequence:	row
Mode sequence:	plate
Detection mode:	f1
Light sensor:	HC-120
Excitation side:	Top
Emission side:	Top
Lamp:	Continuous
Readings per well:	1
Time between readings:	<n/a>
Integration time:	100000	us
Attenuator mode:	m
Motion settling time:	25	ms
Z Height:	3	mm	Numeric
Excitation filter:	1	Fluorescein 485 nm
Emission filter:	1	Fluorescein 530 nm
Beamsplitter:	Top	Fluorescein 505
Excitation polarizer filter:	o
Emission polarizer filter:	o
Detector counting:	SmartRead
Flash lamp voltage:	<n/a>
Delay after flash:	<n/a>
Sensitivity setting:	4
A/D converter gain:	x1
Integrating gain:	x1
Max cps:	111965800	cps
Min counts:	3448	counts
Well list:	r0(a1:h1,a2:h2,a3:h3,a4:b4) = (f1(a1:h1,a2:h2,a3:h3,a4:b4))
Data:	RAW DATA
Units:	rfu
Display format:	%.2f
	1	2	3	4	5	6	7	8	9	10	11	12
A	11196580000.00	53227300.00	43034700.00	22589400.00								
B	1346037000.00	15969300.00	53627100.00	77787300.00								
C	157324200.00	25452200.00	122767700.00									
D	34027100.00	17930600.00	32140100.00									
E	1076325500.00	66476700.00	23688900.00									
F	130443900.00	329941300.00	101658000.00									
G	28536200.00	21557100.00	20010300.00									
H	19289400.00	21359400.00	24842500.00