Load time:	3/15/2006 12:25	
Read time:	3/15/2006 12:25	
Kinetic read cycle:	1  of  1	
Read start delay time:	2	s
Time delay between kinetic reads:	<n/a>	
Barcode:	ERROR	
Method ID:	Luc	
Plate ID:	#386	
Comment:	 	
Microplate format:	Corning 96 Flat Opaque PS	
Shake time:	0	s
Temperature:	31.2	C
Instrument tag:		
Serial number:	AD2123	
Read sequence:	row	
Mode sequence:	plate	
Detection mode:	l0		
Light sensor:	HC-124		
Excitation side:	Top		
Emission side:	Top		
Lamp:	None		
Readings per well:	10		
Time between readings:	100	ms	
Integration time:	1600000	us	
Attenuator mode:	o		
Motion settling time:	0	ms	
Luminescence height:	2	mm	Numeric
Luminescence aperture:	96		
Max cps:	89495	cps	
Min counts:	629139	counts	
Dark Count reading:	856	counts	
Well list:	r0(b10:g12) = counts(l0(b10:g12))		
Data:	RAW DATA											
Units:	counts											
Display format:	%.9e											
	1	2	3	4	5	6	7	8	9	10	11	12
A												
B										3.32E+05	3.42E+05	3.59E+05
C										3.51E+05	3.29E+05	3.40E+05
D										5.61E+05	5.39E+05	5.84E+05
E										8.98E+05	8.37E+05	8.71E+05
F										9.32E+05	9.67E+05	9.99E+05
G										1.38E+06	1.32E+06	1.43E+06
H												
Load time:	3/15/2006 12:33											
Read time:	3/15/2006 12:33											
Kinetic read cycle:	1  of  1											
Read start delay time:	2	s										
Time delay between kinetic reads:	<n/a>	
Barcode:	ERROR	
Method ID:	Luc	
Plate ID:	#387	
Comment:	 	
Microplate format:	Corning 96 Flat Opaque PS	
Shake time:	0	s
Temperature:	31.3	C
Instrument tag:		
Serial number:	AD2123	
Read sequence:	row	
Mode sequence:	plate	
Detection mode:	l0	
Light sensor:	HC-124	
Excitation side:	Top	
Emission side:	Top	
Lamp:	None											
Readings per well:	10											
Time between readings:	100	ms										
Integration time:	1600000	us										
Attenuator mode:	o											
Motion settling time:	0	ms										
Luminescence height:	2	mm	Numeric									
Luminescence aperture:	96											
Max cps:	1089	cps										
Min counts:	6424	counts										
Dark Count reading:	873	counts										
Well list:	r0(b1:g3) = counts(l0(b1:g3))											
Data:	RAW DATA											
Units:	counts											
Display format:	%.9e											
	1	2	3	4	5	6	7	8	9	10	11	12
A			
B	1.02E+04	7.18E+03	6.42E+03
C	1.14E+04	6.90E+03	6.56E+03
D	1.74E+04	1.01E+04	8.35E+03
E	1.39E+04	1.01E+04	8.27E+03
F	9.02E+03	1.05E+04	7.86E+03
G	1.29E+04	1.11E+04	9.85E+03
H