Load time:	5/19/2006 14:21	
Read time:	5/19/2006 14:21	
Kinetic read cycle:	1  of  1	
Read start delay time:	2	s
Time delay between kinetic reads:	<n/a>	
Barcode:	ERROR	
Method ID:	Luc	
Plate ID:	#588	
Comment:	 	
Microplate format:	Corning 96 Flat Opaque PS	
Shake time:	0	s
Temperature:	31	C
Instrument tag:		
Serial number:	AD2123	
Read sequence:	row	
Mode sequence:	plate	
Detection mode:	l0		
Light sensor:	HC-124		
Excitation side:	Top		
Emission side:	Top		
Lamp:	None		
Readings per well:	10		
Time between readings:	100	ms	
Integration time:	1600000	us	
Attenuator mode:	o		
Motion settling time:	0	ms	
Luminescence height:	2	mm	Numeric
Luminescence aperture:	96		
Max cps:	7355	cps	
Min counts:	11606	counts	
Dark Count reading:	644	counts	
Well list:	"r0(a7:c9,e7:g9) = counts(l0(a7:c9,e7:g9))"		
Data:	RAW DATA											
Units:	counts											
Display format:	%.9e											
	1	2	3	4	5	6	7	8	9	10	11	12
A							3.12E+04	4.11E+04	5.18E+04			
B							1.93E+04	1.68E+04	2.10E+04			
C							1.24E+04	1.16E+04	1.32E+04			
D												
E							6.39E+04	5.79E+04	5.45E+04			
F							2.20E+04	1.80E+04	1.64E+04			
G							1.51E+04	1.32E+04	1.31E+04			
H												
Load time:	5/19/2006 14:31											
Read time:	5/19/2006 14:31											
Kinetic read cycle:	1  of  1											
Read start delay time:	2	s										
Time delay between kinetic reads:	<n/a>	
Barcode:	ERROR	
Method ID:	Luc	
Plate ID:	#589	
Comment:	 	
Microplate format:	Corning 96 Flat Opaque PS	
Shake time:	0	s
Temperature:	31	C
Instrument tag:		
Serial number:	AD2123	
Read sequence:	row	
Mode sequence:	plate	
Detection mode:	l0	
Light sensor:	HC-124	
Excitation side:	Top	
Emission side:	Top	
Lamp:	None											
Readings per well:	10											
Time between readings:	100	ms										
Integration time:	1600000	us										
Attenuator mode:	o											
Motion settling time:	0	ms										
Luminescence height:	2	mm	Numeric									
Luminescence aperture:	96											
Max cps:	23373	cps										
Min counts:	20700	counts										
Dark Count reading:	566	counts										
Well list:	"r0(a10:c12,e10:g12) = counts(l0(a10:c12,e10:g12))"											
Data:	RAW DATA											
Units:	counts											
Display format:	%.9e											
	1	2	3	4	5	6	7	8	9	10	11	12
A										5.59E+04	5.79E+04	6.77E+04
B										1.20E+05	1.20E+05	1.12E+05
C										5.97E+04	4.55E+04	6.23E+04
D												
E										2.59E+05	2.45E+05	3.74E+05
F										8.26E+04	7.08E+04	7.60E+04
G										2.07E+04	2.28E+04	4.18E+04
H